Author

For hams, the scan is a very common and practical function. With the continuous development of amateur radio, the new word scanner has appeared. So what is the scanner, and what is the difference between scan and scanner?  ...

Retevis RT23 is a U/V dual band handheld amateur radio station with dual PTT, dual display, and dual standby that supports cross-band repeater. The amateur radio allows the hams to program it. When the walkie-talkie cannot work normally due to wrong operations, we can try to restore the factory settings, also known as initialization. RT23 supports two methods to initialize it, one is shortcut key initialization, the other is software initialization.  ...

Lora is short for Long Range. It is a low-power LAN wireless standard created by Semtech company. Its biggest feature is that it can travel farther than other wireless methods under the same power consumption condition, achieving low power consumption and Long-distance unity, it is 3-5 times longer than the traditional radio frequency communication distance under the same power consumption.  ...

The radio receiver is a device used to receive radio signals. It can convert the RF signal received by the antenna into a baseband signal. Usually, we know the frequency of RF is very high but the baseband frequency is lower, so it requires the receiver to process. According to different processing ways, radio receivers can be divided into direct-emitting radio receiver amplifiers and superheterodyne receivers.  ...

Recently we received customer feedback. After trying to make RETEVIS 73 codeplug and writing into radio successfully, they received No menu item when entering the setting menu. but after trying to restore the factory, the menu shows normally. Why is this?  ...

Many antennas of amateur radios are detachable, then customers can replace the higher gain antennas to extend the communication range according to their needs. However, the non-original high-gain antenna interface can't connect to our radio directly, or the antenna is too long to directly connect horizontally, we need to choose a suitable adapter to connect them. So, how to choose the right adapter?  ...

Ailunce HD1 is a ham radio that supports switching between talk-around and repeater mode. Do you know why and how to switch to turn around mode for Ailunce HD1?  ...

Do you like to program your radio in software? If yes, you need to download the right driver of your radio. do you know how to select the right driver for your Retevis radio?  ...

Have you tried to check the DIR item of your Ailunce HS2? there are many parameters to show. do you know what they mean?  ...

C4FM is a digital modulation for walkie-talkies that hobbyists prefer. Do you know what C4FM means? What are the advantages and disadvantages compared with other digital work modes?  ...