Ailunce HS2 is an ultra-portable full-frequency full-mode SDR radio. Receive frequency coverage 300K~1.6GHZ. The built-in network port can realize remote operation and remote firmware upgrade.
The HAM-BOX mobile app we developed allows the mobile phone to easily control and play radio stations(the app is still under development, any progress we will post on Ailunce website).
Ailunce HS2 adopts a full keyboard design, built-in Bluetooth module, sound card module, and serial communication port module. Full support for currently popular radio control software and logging software. HS2 support: N1MM, FT8, HRD, SDRNUO, Airspy. when using this SDR software only need a Type-C USB cable to connect to your computer is okay.
We are working hard to give you more playable space.
Features |
|
1. Real-time spectrum. | 11. Built-in FLASH memory. |
2. Waterfall chart. | 12. USB TYPE-C interface for power supply and computer connection. |
3. Doppler frequency tracking. | 13. High precision TXCO ± 0.5ppm (-10-60 ℃). |
4, using software-defined radio technology | 14. Ultra-wide working voltage range: 5-32VDC. |
(SDR), full-band support SSB, CW, RTTY, AM, FM. | 15. power supply reverse connect protection. |
5. Double frequency conversion circuit structure. | 16. Built-in GPS / BeiDou, GSM, electronic compass (acceleration, angle sensor) (optional). |
6. IF width and IF shift hardware and software can be modified to provide powerful IF interference suppression. | 17. GPS time service (requires optional GPS module). |
7. DSP digital noise reduction. | 18. Built-in UTC clock. |
8. Built-in 160-6 meters high-speed automatic antenna tuner. | 19. Voltage display. |
9. Built-in electronic key controller, all parameters can be set flexibly. | 20. Unique LORA data transmission (requires optional LORA module). |
10. Built-in sound card with IQ and audio output. | 21. Ultra-lightweight: ≤1KG. |
22. Built-in remote operation so, remote firmware update. |
Standard Module |
Optional Module |
FM module | GPS module |
Bluetooth module | LORA module |
Bluetooth microphone | Electronic compass module |
Built-in sound card | Wired microphone |
Built-in automatic antenna tuner | Shortwave balcony antenna |
Built-in memory | External frequency wheel (under development) |
Transmitter Parameters |
|
Transmitter Architecture | SDR |
Transmission Mode | SSB, CW, RTTY, AM, FM |
Frequency Resolution | 1Hz |
Transmit Frequency Range*1 | 1.800-2.000,3.500-3.900,5.351.5-5.366.5, 7.000-7.200, 10.100-10.150, 14.000-14.350, |
18.068-18.168,21-21.450,24.890-24.990, 28-29.7,50-54, 144-146, 430-440MHz | |
Output Power | HF+6m:SSB(1~20W),CW(0.1~20W), |
VHF: SSB/CW/FM(0.5~5W), FM(0.1~20W) | |
UHF:SSB/CW/FM(0.5~5W), AM(1~5W) | |
Power Consumption | TX:13.8V~5A |
RX:13.8V~0.25A(Normal),0.35A(Max brightness&Highest audio) | |
Carrier Suppression | <50db |
Spurious Suppression | 1.8—54MHZ: ≥50db |
144—146MHZ: ≥60db | |
430—440MHZ: ≥60db | |
Memory Channel | 999 |
Receiver Parameters |
|
Receiver Architecture | SDR |
Receiver Mode | SSB, CW, RTTY, AM, FM |
Receive Frequency Range | 300KHz-1.6GHz*2 |
IF Bandwidth | 20KHz |
IF | 12KHz |
Sensitivity*3 | SSB/CW:(BW: 2.4kHz @ 10dB S/N) |
0.18uV(1.8—54MHZ), | |
0.25uV(144—146MHZ), | |
0.25uV(430—440MHZ) | |
AM:( BW: 6kHz @ 10dB S/N) | |
15uV(0.3—1.8MHZ), | |
2uV(1.8—54MHZ), | |
2uV(144—146MHZ), | |
2uV(430—440MHZ) | |
FM:(BW: 15kHz @ 12dB S/N) | |
0.5uV(28.0—29.7MHZ), | |
0.25uV(50—54MHZ), | |
0.3uV(144—500MHZ), | |
0.5uV(430—440MHZ) | |
IF Suppression | ≥70db |
Image Suppression | ≥80db |
Audio Output Power | 2W (10% distortion rate, 8Ω load, 3KHZ) |
Antenna tuner parameters |
|
Tuning frequency range | 1.8-54MHZ |
Tuning impedance range | 16.7Ω--150Ω unbalanced (SWR is better than 1: 3) |
Tuning accuracy | VSWR: 1: 1.5 or less |
Tuning time | 2-5S (full segment 10S) |
Tuning method | Automatic / Manual |
Spectrum parameters |
|
Spectrum bandwidth | 48K |
RF Spectrum | FFT |
Structural parameters | |
Size | 170X120X45mm (excluding protrusions) |
Weight | <1KG |
Working voltage parameters |
|
Voltage range | 5—32V receiving range, |
5-12V transmit power limit, | |
12-18V full power output, | |
18-32V transmit power limit. | |
Antenna interface | |
Antenna interface | TNC/BNT/M/N (optional) |
Working environment parameters | |
Working temperature | -10 ℃ to 60 ℃ |
Working humidity | 10% -- 90% |
Note *1: Frequency range is different according to different countries or areas, the actual frequency by local legal provisions.
Note *2: Data retention.
Note *3: to be calibrated, the final interpretation of all manufacturers.
Hello I need information about the ACC and LAN socket. How to connect external power amp with automatic band swith? How to configure lan interface to remote work with SH2. THX Tom
You refer to those open source file. https://www.ailunce.com/Support/HS2/UserManual
Hello, thank you for the answer, but unfortunately it is not exhaustive. There is no information that I am asking about in the link. No detailed instruction manual - specification. In addition, I would like to receive information on how to connect the radio to the LAN. In my case, after connecting the LAN cable to the radio, there is no interaction, the network scanner does not detect the radio in the network, the router works in DHCP mode. The indicated documentation is insufficient. When placing a commodity on the market, you should try harder. As of today, my satisfaction with the product will run from one day to the next after another radio test.
Today (Aug 1) I received my HS2. Many thanks for the early delivery. I will spend the next few weeks checking it out. Maybe get the GPS and Compass modules too. :) Thanks again!
My GPS unit don't work at this moment and I don't how and where download the HAM-BOX remote control APP. Also I need info about how works the ACC socket for PA connection and I need schematic Diagram. Rig works well and It has many nice features for his price. Excellent audio and reception! Continuing make it better in next firmware!! Thanks in Advance! Take Care Domi EA1W
Hello, the ham-box is not available now. We are speeding up the develpoment, and will release it asap. about the connector, we have release the control protocal, you can download it from HS2 support page. 73
Does the HS2 support PL (Sub-Audible Tone) Encode & Decode for FM starting on 29MHz and above? Is there an external battery unit available? Charger? When is it available in the USA? Does it use any extra BW Filter (CW & SSB) options? Thank you
Do you mean CTCSS? HS2 supports CTCSS for FM. There is no external battery for HS2.
When can i expect my order finish for delivery? Thanks
We will arrange the shipment this month. Thanks.
Price??? Where can it be ordered from??
Quanto costa ? La gamma in ricezione è fino a 1,6 ghz?
Yes, but only the common frequencies effect are good.
do you made US version tx= 144 to 148 and 430 to 450...? and MARS MOD..?
It's it true that there will be an DMR module for this radio?
There is no DMR module, and the current HS2 don't support DMR.
Il manuale operativo non è ancora pronto?
Yes, when the manual is available, we will list it on our website.
Axel
Hi, my question: What is the Power in Watt at 145 MHZ and 50 MHZ? Regards, Axel
Author
UV band 5w, HF band 20w.