Ailunce HS2 is an ultra-portable full-frequency full-mode SDR radio. The HAM-BOX mobile app we developed allows the mobile phone to easily control and play radio stations. Make the operation of the radio more convenient and fast, the radio adopts a full keyboard design, built-in Bluetooth module. Sound card module and communication serial module. Full support for currently popular radio control software and logging software. We are working hard to give you more playable space.
1. Real-time spectrum.
2. Waterfall chart.
3. Doppler frequency tracking.
4. Using software-defined radio technology (SDR), full-band support SSB, CW, RTTY, AM, FM.
5. Double frequency conversion circuit structure.
6. IF width and IF shift hardware and software can be modified to provide powerful IF interference suppression.
7. DSP digital noise reduction.
8. Built-in 160-6m high-speed automatic antenna tuner.
9. Built-in electronic key controller, all parameters can be set flexibly.
10. Built-in sound card with IQ and audio output.
11. Built-in FLASH memory.
12. USB TYPEC3.1 interface for power supply and computer connection.
13. Dual antenna interface (HF / 50MHZ, 144MHZ / 430MHZ).
14. High accuracy TXCO ± 0.5ppm (-10-60 ℃).
15. Ultra-wide working voltage range: 5-32VDC.
16. Built-in GPS / Beidou, GSM, electronic compass (acceleration, angle sensor) (optional)
17. GPS time (requires optional GPS module).
18. Built-in UTC clock.
19. Voltage display.
20. Unique LORA data transmission (requires optional LORA module).
21. Ultra-light weight: ≤1KG
Standard Configuration | Option Configuration |
FM module | GPS module |
Bluetooth module | LORA module |
Bluetooth microphone | electronic compass module |
Built-in sound card | wired microphone |
Built-in automatic tuning | 1KW Amplifier |
Built-in memory | Satellite automatic antenna |
Shortwave balcony antenna |
Transmitter Architecture | SDR |
Transmission Mode | SSB, CW, RTTY, AM, FM |
Frequency Resolution | 1Hz |
Transmit Frequency Range |
1.800-2.000, 3.500-3.900, 5.351.5-5.366.5, 7.000-7.200, 10.100-10.150, 14.000-14.350, 18.068-18.168, 21-21.450, 24.890- 24.990, 28-29.7, 50-54, 144-146, 430-440MHz |
Output Power |
HF+6m: SSB(1~20W), CW(0.1~20W), FM(0.1~20W), AM(1~5W), VHF: SSB/CW/FM(0.5~5W) UHF:SSB/CW/FM(0.5~5W) |
Power Consumption |
TX:13.8V~5A RX:13.8V~0.2A(Normal),0.3A(Max brightness&Highest audio) |
Carrier Suppression | <50db |
Spurious Suppression |
1.8—54MHZ: ≥50db 144—146MHZ: ≥60db 430—440MHZ: ≥60db |
Memory Channel | 999 |
Receiver Architecture | SDR |
Receiver Mode | SSB, CW, RTTY, AM, FM |
Receive Frequency Range | 300KHz~500MHz |
IF Bandwidth | 20KHz |
IF | 12KHz |
Sensitivity |
SSB/CW:(BW: 2.4kHz @ 10dB S/N) 0.18uV(1.8—54MHZ), 0.25uV(144—146MHZ), 0.25uV(430—440MHZ) AM:( BW: 6kHz @ 10dB S/N) 15uV(0.3—1.8MHZ), 2uV(1.8—54MHZ), 2uV(144—146MHZ), 2uV(430—440MHZ) FM:(BW: 15kHz @ 12dB S/N) 0.5uV(28.0—29.7MHZ), 0.25uV(50—54MHZ), 0.3uV(144—500MHZ), 0.5uV(430—440MHZ) |
If Suppression | ≥70db |
Image Suppression | ≥80db |
Audio Output Power | 2W (10% distortion rate, 8Ω load, 3KHZ) |
Tuning frequency range | 1.8-54MHZ |
Tuning impedance range | 16.7Ω--150Ω unbalanced (SWR is better than 1: 3) |
Tuning accuracy | VSWR: 1: 1.5 or less |
Tuning time | 2-5S (full segment 10S) |
Tuning method | Automatic / Manual |
Spectrum bandwidth | 48K |
RF Spectrum | FFT |
Size | 170X120X45mm (excluding protrusions) |
Weight | <1KG |
Voltage range |
5—32V receiving range, 5-12V transmit power limit, 12-18V full power output, 18-32V transmit power limit. |
Antenna interface | TNC / BNT / M (optional) |
Working temperature | -10 ℃ to 60 ℃ |
Working humidity | 10% -- 90% |
(The photos only for reference only, the products are subject to actual delivery. )
Здравствуйте! Когда начнется отправка предварительно оплаченного 1 этапа? Я оплатил 23 мая 2020. С уважением Михаил.
Your order will ship in September.
Hello! When will the download of software on resources be active?
We will release it recently.73
On the manufacturer's website I posted the user documentation in English. software is not yet active for downloading
Yes, it is not available now, we will release it when it is ok recently. thanks,73s
Can the HS2 do cross band splits (preferably in full duplex) for satellite?
It can do cross band transmit and receive, but it si no full duplex. 73.
Hello! Is there any new information on the transceiver? Show a photo inside!
Caution: the HS2 is not made for US operators, because it will not transmit on 7.200 to 7.300 MHz, 146.000 to 148.000 MHz, and 440.000 to 450.000 MHz.
If they are legal frequency in the United States then it will support. we'll make sure of that. 73.
Will there be a connectivity at the New HS2 like the CAT Connection of Most (all) other transceivers on the market (to operate with HamRadio Deluxe (PC) or MacLogger DX (MAC) ? Mostly RS232 or key/jack (ICOM) to Exchange details like frequency, mode a.s.o. ?
Hello! I paid the pre-order. Where can I see the user manual and service manual for the tractor? Regards, Mikhail. rk6avl 73!
We will release the manual recently. Thanks.
Спасибо!
What can be controlled via the USB3.1 connection? Will it be possible to use the HS2 as the center of a computer-controlled stack—that is, both RX and TX with a program like SDRAngel?
Hello! Will USB hubs work to make possible use of more accessories?
Yes, but you had better ask the seller before you buy the accessories to avoid it won't work.
Yolanda, but you are the seller... I am not sure which accessories will work with that radio. I thought that there can be others than tuning knob which will work via USB. It is very wide area of possible accessories to use. I cannot even imagine them all. ;) I am going to do preorder. I will pay when I will buy - am I right?
Yolanda, cannot see second 'page' with comments https://www.ailunce.com/Blog/BlogArticalComments?pageIndex=2 Error. An error occurred while processing your request. Request ID: |9ef849b7-473b4c781c2a2fdc. Development Mode Swapping to Development environment will display more detailed information about the error that occurred. The Development environment shouldn't be enabled for deployed applications. It can result in displaying sensitive information from exceptions to end users. For local debugging, enable the Development environment by setting the ASPNETCORE_ENVIRONMENT environment variable to Development and restarting the app.
Nice Day Possible Video Out for external display from USB C: or other ? Possible to use External 101 or similar PC keyboard / BT or USB ? Touch screen usage or Keypad/Phone only ?
Terrylaw
Very interesting to read you Good luck to you