0.1-1300MHz SWR,Returnloss Measurement Measurement parameters: SWR, R, +Jx, -Jx, IZI, return loss
Features:
1. This product adopts metal shielding design, which can reduce external interference and improve measurement accuracy
2. Frequency range continuous coverage with HF/VHF/UHF
3. Measurement parameters: SWR, R, +Jx, -Jx, IZI, return loss
4. Measurement mode: single point measurement, scanning (frequency sweep) and TDR mode
5. SWR Measurement range: 1.0-1999 (Single Point Mode), 1.0-20.0 (Scan Mode)
6. Display modes: Numeric Display, Curve Display, Smith Diagram
7. Built-in rechargeable lithium battery, so you can use it at anytime and anywhere
8. No buttons are needed, all capacitive touchscreens on the display
9. Antenna analyzer is widely used in antenna DIY production, installation, debugging, testing maintenance, etc.
Specification:
1. Frequency Range: 0.1-1300MHz
2. HF/VHF/UHF contiunous coverage
3. In/Out Impedance: 50
4. Measurement Parameters: SWR, R, +Jx, -Jx, |Z|, Returnloss
5. Measurement Mode: Single point measurement, Scanning (Frequency Sweep), and TDR Mode
6. SWR MeasureMent Range: 1.0-1999(Single Point Mode), 1.0-20.0 (Scan Mode)
7. Display Modes: Numerical display, curve display, simith chart
8. Connector Type: UHF N-type connector
9. VNA:SMA
10. SMA OPEN-SHORT-LOAD Calibration Kit x 1
11. LCD size: 480x272 4.3" TFT LCD display
12. Touch Screen Type: Capacitive
13. All capacitive touchscreen on the display – no buttons are needed
14. Power Source: USB or Internal Li-ion
15. Built-in Li-ion charging circuitry and DC-DC booster
16. Maximum charging current: 5V/1.5A
17. External Storage Method: TF card
18. Dimensions: 133·85·29 mm Does not contain prominent ports.
19. Weight: 550g
20. Warning: if the product has parameter changes, the actual test will prevail.
Package Included:
1x 0.1-1300mhz HF/VHF/UHF Antenna Analyzer
1 x N Male to SMA Male Adapter