How to set and send the Repeater Pilot Tones on Retevis RT95

Yamy
Dec 30,2022
- 0
Retevis RT95, Repeater tone

When we try to connect to repeaters, we need to send a certain strength of pilot tone to wake up the repeater function. we know Retevis RT95 can send the 1000Hz tone, 1450Hz tone, 1750Hz tone and 2100Hz tone. Do you know how to set and send the repeater pilot tones?

1. Long press the FUNC key, then press the PUSH key(also channel knob) and enter the FUNC MENU;

2. Rotate the channel knob and select the TBST setting, and press the PUSH key to enter the editing mode;

3. After pressing the PUSH key, the font is green as below. then you can rotate the channel knob to select the Tones, such as 1000Hz tone, 1450Hz tone, 1750Hz tone, 2100Hz tone, and so on, then press the PUSH key to confirm it and return to the main screen;

4. Then when you set the right repeater channel, you can press the PTT+DOWN key, or the UP + DOWN key on the mic to send the Repeater Pilot Tones.